您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE ARP5416 Aircraft Lightning Test Methods

作者:标准资料网 时间:2024-05-21 18:31:54  浏览:8402   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE ARP5416
Title:Aircraft Lightning Test Methods
Issuing Committee:Ae-2 Lightning Committee
Scope:This document is one of a set covering the whole spectrum of aircraft interaction with lightning. This document is intended to describe how to conduct lightning direct effects tests and indirect system upset effects tests. Indirect effects upset and damage tolerance tests for individual equipment items are addressed in DO-160/ED-14. Documents relating to other aspects of the certification process, including definition of the lightning environment, zoning, and indirect effects certification are listed in Section 2.This document presents test techniques for simulated lightning testing of aircraft and the associated systems. This document does not include design criteria nor does it specify which items should or should not be tested. Acceptable levels of damage and/or pass/fail criteria for the qualification tests must be approved by the cognizant certification authority for each particular case. When lightning tests are a part of a certification plan, the test methods described herein are an acceptable means, but not the only means, of meeting the test requirements of the certification plan.Each test method is set out in a uniform format, describing the test purpose, test object, test setup, test waveforms (voltage and/or current), measurements and data recording, test procedure and data interpretation. Guidance is provided on how to select the appropriate test or series of tests, and how the test results can be assessed.Natural lightning is a complex and variable phenomenon and its interaction with different types of vehicles may be manifested in many different ways. It is not intended that every test described herein be applied to every system requiring lightning verification tests. The document is written so that specific aspects of the environment can be called out for each specific program as dictated by the vehicle design, performance and mission constraints.
下载地址: 点击此处下载
基本信息
标准名称:出口金属硅中铁、铝、钙的测定 容量法
英文名称:Determination of iron aluminium and calcium for export silicon metal—Volumetric method
中标分类: 冶金 >> 半金属与半导体材料 >> 半金属
发布部门:中华人民共和国国家进出口商品检验局
发布日期:1996-07-10
实施日期:1996-12-01
首发日期:
作废日期:
主管部门:中华人民共和国国家进出口商品检验局
提出单位:中华人民共和国进出口商品检验局
归口单位:中华人民共和国进出口商品检验局
起草单位:河南进出口商品检验局
起草人:郑汝喜、袁萍、王恩林
出版日期:1996-12-01
页数:7页
适用范围

本标准规定了用EDTA容量法测定铁、铝、钙含量的方法。
本标准适用于出口金属硅中铁、铝、钙含量的测定。测定范围0. loo-1.5%,

前言

没有内容

目录

没有内容

引用标准

GB 1 . 4- 88 标准化工作导则化学分析方法标准编写规定
GB 1 46 7-78 冶金产品化学分析方法标准的总则及一般规定

所属分类: 冶金 半金属与半导体材料 半金属
【英文标准名称】:TestMethodforLengthChangeofConcreteDuetoAlkali-CarbonateRockReaction
【原文标准名称】:由于碱金属碳酸盐矿石反应引起混凝土长度变化的试验方法
【标准号】:ASTMC1105-1989
【标准状态】:作废
【国别】:美国
【发布日期】:1989
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:试验;建筑;混凝土;尺寸精度
【英文主题词】:construction;testing;dimensionalaccuracy;concretes
【摘要】:
【中国标准分类号】:Q13
【国际标准分类号】:91_100_30
【页数】:4P;A4
【正文语种】:英语